How to Reseed Your Lawn (2024)

ByRebecca Wright Brown

Reviewed by Craig Elworthy

Step 1

Get a Soil Analysis

Plunge your spade about 6 in. deep and pull out a plug of soil. Then slice off a section of the plug (top to bottom). Remove the grass and rocks and mix all the samples together. Don’t even think about replanting until you get the results of a soil analysis. Contact a local extension service or search the Internet for a soil-testing lab near you.

Select three different locations around your lawn and collect samples. Mix them together and scoop into a container. Note on the lab form that you’ll be planting new grass and whether you bag the clippings when you mow or return them to the lawn. In a couple of weeks, you’ll get a report with recommendations about which fertilizers or soil treatments to add.

TMB Studio

Step 2

Kill Everything

Cover nearby plants with a tarp. Choose a calm day and hold the spray head close to the grass to prevent overspray.You can kill the grass with chemicals like Roundup or Killzall.

TMB Studio

If you hate the idea of using chemicals and have a large area, rent a sod cutter to remove the lawn surface. Or kill the grass by blocking out its sunlight with black poly film (4-mil or thicker). Remove the poly when the grass is dry and brown-two to three weeks or longer, depending on the weather.

TMB Studio

Step 3

Remove the Dead Stuff

Rip up all the dead grass and weeds with a rigid tine rake and lots of muscle as part of the reseeding lawn job. Now comes the upper body workout: rake up the dead grass and weeds before you amend the soil. It’s got to be done for this reseeding lawn project.

TMB Studio

Step 4

Improve the Soil

Spread the conditioners across the entire lawn. Then till them into the soil to a depth of about 5 in. Don’t think you can fix bad soil just by adding a few inches of black soil on top of the old. Instead, rent a tiller to till in the soil conditioners recommended by the soil analysis.

TMB Studio

“Adding good-quality black topsoil over bad soil is like putting chocolate frosting on a stale cake—it doesn’t fix the underlying problem.” —Bob Mugaas, Turf Expert

Step 5

Smooth the Soil

Level and smooth the soil with a broom rake. Then drag the rake (tines up) to create “furrows” for this reseeding lawns job.Grass seed needs smooth and level ground to get the best germination. And it needs good seed-to-soil contact. So first remove all rocks and debris, then smooth the soil with a rake.

TMB Studio

Step 6

Add a Starter Fertilizer

Spread lawn starter fertilizer into the furrows with a spreader. Don’t overdo it.A starter fertilizer gives grass seed the nutrients it needs to germinate and grow quickly. Consult with a local nursery to find the best starter fertilizer for the seed you select. Follow the instructions on the bag for the proper spread rate for a new lawn and apply the fertilizer.

TMB Studio

Step 7

Pick Seed to Match Your Site

Consult with the grass expert at a garden center to select a seed that matches your site conditions, lawn care preferences and budget. Ask about the newer low-maintenance and drought-resistant varieties. Purchase grass seed by the bag or in bulk, by the pound. But buy just what you need. Don’t apply the leftover seed—extra seed actually reduces the germination rate.

Step 8

Prepare the Seed

Pour the seed and fertilizer into a plastic bucket and mix it thoroughly. To avoid applying too much seed, mix the seed (4:1 ratio) with a fertilizer/ bulking agent.

TMB Studio

Step 9

Spread the Seed

Turn the broom rake upside down and drag it side-to-side over the furrows until only 10 to 15 percent of the seed remains uncovered.

TMB Studio

Fill a sod roller halfway with water and roll the seed to pack the soil and seed mixture.Load the seed into a spreader and apply it for the reseeding lawn work. Make sure it doesn’t fly into nearby gardens. Rake to cover the furrows as shown. Then compact the soil with a sod roller to get good seed-to-soil contact.

TMB Studio

Step 10

Add Mulch or Grass Seed Accelerator

Set the spreader to the widest setting and walk quickly to get a light application of the pellets.

TMB Studio

This accelerator absorbs moisture and slowly releases it. Cover the soil with compost mulch to retain water during germination. Or apply a “grass seed accelerator”. The accelerator absorbs more moisture than either mulch or hay and then slowly releases it. It also degrades naturally, eliminating cleanup.

TMB Studio

Step 11

Water, but Not Too Much

Place an impact sprinkler in the corner of the lawn and set it to spray in a quarter arc. Then move it to the other corners. Water the new lawn generously right after the mulch application, but stop as soon as you see puddles forming. Then keep the soil moist to a depth of 4 to 6 in. for best germination.

Keep watering regularly as the seedlings appear and grow. Gradually reduce the watering over a six-week period. Then switch to your normal watering routine.

TMB Studio

“Most people overwater new seed. Just keep the soil damp for the best germination.”
Bob Mugaas, Turf Expert

Step 12

Cut the Grass With TLC

Mow the new lawn once it reaches a height of 3 in. Use a newly sharpened blade—it’s healthiest for the grass. Cut just 1/2 in. per mowing. Set the cutting height to 2-1/2 in. Use a new or sharpened blade to make sharp, clean slicing cuts. Avoid using a dull blade—it rips the grass, setting up the conditions for disease.

TMB Studio

Step 13

FAQs

We asked Lawnbright founder Craig Elworthy to answer some of the most frequently asked questions about reseeding your lawn.

How often should you water a reseeded lawn?

Short answer: A LOT. A newly seeded lawn needs the top 1″ of soil to remain damp for the first 2-3 weeks. This requires a lot of short and frequent watering cycles to help keep the seed moist. Depending on the climate and the time of year, you could be watering 5 times per day at 10 minutes per session for the first 3 weeks. Once you see sufficient germination (over 60-70% of your seed has sprouted) you can back off to watering once or twice a day, and then finally after a month you can go back to a typical watering schedule of 1-2 times per week.

How long does it take for a reseeded lawn to grow?

It depends on the type of seed. Annual ryegrass can germinate in as little as 2-3 days. On the other end of the spectrum, Kentucky Bluegrass can take up to 21 days to germinate. So it all depends on the type of seed you choose.

Can you walk on a reseeded lawn?

Despite what you’ve probably heard, you can walk on a newly seeded lawn – right up until you start seeing evidence of new growth. Walking on the lawn immediately after seeding will compact the soil, which helps achieve seed to soil contact which is essential for germination. When you see the new grass blades starting to emerge, stay off the lawn for the next 3 weeks until it can mature.